If anyone want's more fitting LED's, spots, etc

roosteruk · Post by **roosteruk** » Thu Jun 12, 2008 11:08 pm

If anyone want's other things beside coolant alarms fitting, just ask before I go.
I will be available (hopefully) to consider the extra service in between fitting alarms.
Just put a post up and I will let you know if it can be done or not.
Weather permitting !!!

All monatory donations, gratefully received....

roosteruk · Post by **roosteruk** » Thu Jun 12, 2008 11:22 pm

Hi Keith,
Get to where you need , eg, fitted to the vehicle and I can wire them up.
I am taking all the necessary stuff, cable, crimps, convoluted tube, etc, etc.
I will also have relays and illuminated switches (non Mazda).

Cheers

Karl

Post by **Bob** » Thu Jun 12, 2008 11:26 pm

Top man Rooster, what a kind offer.

mr and mrs pips · Post by **mr and mrs pips** » Fri Jun 13, 2008 10:08 am

roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked

?

No switch on dash. ?

regards mrs P

haydn callow · Post by **haydn callow** » Fri Jun 13, 2008 11:59 am

As most of you know, apart from the coolant alarms I supply BMW clocks that fit perfectly under/over your radio/CD. I will have a supply with me and I can fit orange/white/blue/green backlights to match your dash/radio, I also have metal "bling" dial rings and I can enen do a white dial/face.They come fully checked out and with labled wires.
The negotations for the supply of Engine Watchdog TM2 temp alarms is progressing well and I hope to have some in a couple of weeks. They cost £73 from Oz and you can expect to pay around £20 on top of that for customs/post office handling. That makes them around £90/95.
I'm hoping to be able to pass them on to forum members for around £68.

roosteruk · Post by **roosteruk** » Fri Jun 13, 2008 5:36 pm

mr and mrs pips wrote:roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked ?

No switch on dash. ?

regards mrs P

Of course I will check them out.
I will be able to fit an illuminated switch, but it will not be a Mazda one. It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.
If you want to get hold of a switch yourself, I will try and fit that if you wish?

Regards

Karl

Holly · Post by **Holly** » Fri Jun 13, 2008 5:52 pm

Roosteruk

Are you good with electrics? Could you check my drinking water pump to see if it's really dead?

roosteruk · Post by **roosteruk** » Fri Jun 13, 2008 5:54 pm

Holly wrote:Roosteruk

Are you good with electrics? Could you check my drinking water pump to see if it's really dead?

I am ok I think, maybe you could ask around about me if you are not sure.....I Will have a look for you.

mikeonb4c · Post by **mikeonb4c** » Fri Jun 13, 2008 5:55 pm

roosteruk wrote:It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.

Woops, never thought of that. Mine doesnt. Oh well, another job to do

mr and mrs pips · Post by **mr and mrs pips** » Fri Jun 13, 2008 6:03 pm

roosteruk wrote:
mr and mrs pips wrote:roosteruk

could I ask for you to check out my front spots. All fitted and wired, never worked ?

No switch on dash. ?

regards mrs P
Of course I will check them out.
I will be able to fit an illuminated switch, but it will not be a Mazda one. It must be illuminated or illuminate a warning light on the dash to meet with legal requireements.
If you want to get hold of a switch yourself, I will try and fit that if you wish?

Regards

Karl

Fantastic - I will see if I can get hold of a Mazda switch with a light, if not whatever you have will be great.

We will be looking out of the weather vane possibly Thu or definatly Friday depending on the 13 week old lads ability to travel. see you there..

Regards Mr & Mrs Pips

haydn callow · Post by **haydn callow** » Fri Jun 13, 2008 6:11 pm

Had a word with Karl....he's going to be busy.....you could expect to pay £15/20 to get a clock fitted at a garage/auto electrician. For the Bash only Karl will fit them for a FIVER. You will see my basic clocks on ebay for £24.......get one fitted at the bash for £25 all in.
coloured glows, metal rings etc extra.

B*Witched Blingo · Post by **B*Witched Blingo** » Fri Jun 13, 2008 8:19 pm

Oh just found this one and a song popped into my head.. Dreeeeam, dream dream dream, dreeeeam... One day when I'm biggerer hehehehe..

I have to say DBO's ickle twinkle lights inside look really good...

haydn callow · Post by **haydn callow** » Fri Jun 13, 2008 8:38 pm

Pendle ? is that near Downham just north of Chatburn. When I was a scout (50 years ago) 3 of us did a trek over Pendle Hill, we found 3 unexploded mortor bombs (it was used as a range in the war) the local Bobby in Whalley did a runner when we walked in with them. Ah !! happy days..

B*Witched Blingo · Post by **B*Witched Blingo** » Sat Jun 14, 2008 11:05 am

Yup Pendle, Downham, Chatburn Gisburn, Barley all that area.. Lubbley..Born and Bred was filmed at Downham. Must come back. Quite a pretty area.. Hotpot on one side of Mother Hill were on the other.

Happy memories with the Bomb then?

Sorry Rooster off Subject a tad..

Right Back to Lectricory. hehehehehe

If anyone want's more fitting LED's, spots, etc

If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc

Re: If anyone want's more fitting LED's, spots, etc