Page 1 of 1
air intake cowl
Posted: Tue Apr 15, 2008 10:05 pm
by steady1946
Anyone out there have a picture of the air intake cowl in situ.I have just had to buy one from Bell Garage because when I bought my Bongo I noticed it did not have a cowl on the air intake,so I don't know what it looks like when fitted!!
Re: air intake cowl
Posted: Tue Apr 15, 2008 10:10 pm
by Peg leg Pete
Would gladly post a photo, but my wife is still out at a works ice skating do
Re: air intake cowl
Posted: Tue Apr 15, 2008 10:11 pm
by francophile1947
Which one? - intercooler or heater?
Re: air intake cowl
Posted: Tue Apr 15, 2008 10:23 pm
by steady1946
I found a picture of the cowl on another thread.It's for the heater Francophile.Point is along with the cowl I got this foam which is sticky on one side.Does this go around the inside of the lip of the cowl inside and then the whole thing is pushed onto the air intake?
Re: air intake cowl
Posted: Tue Apr 15, 2008 10:30 pm
by francophile1947
Can't remember
- I'll have a look tomorrow if nobody comes up with the answer.
Re: air intake cowl
Posted: Wed Apr 16, 2008 2:41 am
by bigdaddycain
99% certain its on the inside... (without going out, moving three cars and looking
)
Re: air intake cowl
Posted: Wed Apr 16, 2008 9:49 pm
by steady1946
Thanks Bigdaddycain.I got the cowl from Bellshill Garage and had a word with him today.He said the foam that is around the air intake is usually really stuck,so he cut a length of foam that he had in the garage for me to put on the air intake so that I would get an air tight connection.I think that would explain it.Now all iv'e got to do is put it on!
