Bongo Fury

Hi all
I've now got a footrest from Little Movers, but they always put the bolts back in the van - does anybody know the size of bolt required to fit my seat/footrest?

There was a pair for sale in BF Members section a couple of days ago - I think they have bolts with them if any help

from what i can remember when i fitted mine they are 8 or 10mm bolts about inch long if i get time later i will pull one out

Thanks Mike - I've already got the footrest - just need the bolt size/thread so I can fit it.
Thanks ebygum32 - that would be useful.

Franco take the footrest to a engineers merchant, they will tell you the thread size, plus some vehicles use metric fine threads

Peg leg Pete wrote:Franco take the footrest to a engineers merchant, they will tell you the thread size, plus some vehicles use metric fine threads

Ta Pete, but the threads in the Bongo and I couldn't get it through the door

Can you wait 15mins?? I'll go and take one out and measure it, thread length and pitch.

No problem Chris - thanks.

only trying to help

Peg leg Pete wrote:only trying to help

Yes mate, sorry - I wasn't taking the P, just couldn't resist it.

Ok folks here we go. The original bolts are actually a thread cutting screw. However an 8mm 1.25mm pitch bolt is fine (I tried it) You will need a bolt that has 25mm of thread under the head. You will also need a flat washer of 15-20mm diameter. If you pm me I'll post some tomorrow, got thousands at work!

Thanks Chris - PM on the way.

great to see such helpful advice and help

Peg leg Pete wrote:great to see such helpful advice and help

That's what makes this site so fantastic.