Wheel PCD

stulegg · Post by **stulegg** » Wed Apr 04, 2007 5:42 pm

HI all. . .

I've got some alloys and have been asked what the PCD is. Being a 5 stud wheel I cant measure it accurately so I wondered if anyone here knows it. . . cheers. . . stu. ..

Colin Lambert · Post by **Colin Lambert** » Wed Apr 04, 2007 5:54 pm

You could look it up in the members area or if you can't be bovvered, you could rely on my good nature!! 'Spose us Poole types should stick together

114.3

pippin · Post by **pippin** » Wed Apr 04, 2007 5:58 pm

Good to see that you are back on form Colin!

mikeonb4c · Post by **mikeonb4c** » Wed Apr 04, 2007 11:25 pm

Ought to sell mine but cant bear to part with them - they are so lovely even though I cant afford to shod them right now. Possessive or wot!

stulegg · Post by **stulegg** » Thu Apr 05, 2007 8:32 am

odd. . . I thought I replied to this to say ta but it seems to have been deleted!!!!!

Harry · Post by **Harry** » Thu Apr 05, 2007 8:36 am

Can't you make some Mike?

mikeonb4c · Post by **mikeonb4c** » Thu Apr 05, 2007 1:19 pm

Your 'flu is causing mild delirium Harry

You can make sandals out of BF Goodrich tyres, but my experiments with trying to make tyres out of BF Goodrich sandals failed miserably (specifically where I used Evostick to try and join the old sandals together).

Next I tried using the kids party ballons - 6 ply, one balloon inside the next etc. This was more promising, and although the ride was a bit uneven, and I had to use velcro (I have plenty) glued around the perimeter to make them tread legal, they worked fine until I took them off the prototype kiddie car and put them on the 2 ton Bongo, where they failed as soon as I lowered the wheel off the jack. I'm currently working on an idea involving old garden hose, compressed air and rubber bungs. Hope to report on that in the fullness.

Hope this clears the mess off the road so we can get the traffic moving again

Mike