Page 3 of 3
Posted: Fri Feb 29, 2008 1:17 am
by brorabongo
I'm waiting for your update with interest Mike, as I have suffered from the flickering 9 LEDs in the side lights, with both having the same middle three LEDs faulty.
Yet the interior ones are still good, and are older
Re: HELP: Correct LED bulbs for front cab interior light
Posted: Thu Apr 03, 2008 10:24 pm
by mr and mrs pips
Hi
I have a couple of festoons waiting to insert into the front interior courtsey lights.
Managed to get the light fitting Off with the squeeze and push to the left technique.
However the lugs holding the plastic light covers appears very tuff how do you release the covers without breaking them. ?
anyone help..
Re: HELP: Correct LED bulbs for front cab interior light
Posted: Fri Apr 04, 2008 1:45 am
by bigdaddycain
mr and mrs pips wrote:Hi
I have a couple of festoons waiting to insert into the front interior courtsey lights.
Managed to get the light fitting Off with the squeeze and push to the left technique.
However the lugs holding the plastic light covers appears very tuff how do you release the covers without breaking them. ?
anyone help..
If i remember correctly, i used the tip of my ignition key,on the lugs from the back, the cable is folded up into the roof, it can be manipulated out further to give you more room to see...
Its worth giving the lens a wash too, mine was filthy, don't forget to thoroughly dry it before replacing it though!
