Wheels!

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

bonog
Bongolier
Posts: 112
Joined: Wed Aug 01, 2007 11:14 pm
Location: NorthWest
Contact:

Post by bonog » Wed Jan 16, 2008 12:54 am

Just to continue the Japanese Wrestling theme here I too opted for Sumo Firenza ST08s on my replacement rims - 215/55 R17 98 all-round. Because the rims were only 6.5", I did not want to squeeze too wide a tyre onto them so went for 215mm. At that width, Sumos were one of only two or three possible choices with the necessary weight rating (ie >96). Pirelli P7 XL was another option but I did not fancy shelling out over £400 just 1 month before Xmas! I thought I would try the Sumos and see how they fared.... Ride and handling are good but after just 2 months it is too early to comment on wear rates. :D
scanner
Supreme Being
Posts: 7247
Joined: Wed Sep 19, 2007 10:20 pm
Location: Cambs

Post by scanner » Wed Jan 16, 2008 1:36 am

That's why I'm glad I went for 16" rims, a far wider range of suitable tyres at suitable prices than at 17" or 18".
bonog
Bongolier
Posts: 112
Joined: Wed Aug 01, 2007 11:14 pm
Location: NorthWest
Contact:

Post by bonog » Wed Jan 16, 2008 2:49 am

Sounds like a completely sensible, logical decision to make...but there is an extra aspects that always has to be considered:

1. "Bongos Law of Shrinking Alloys" states that

" Any wheel-rim attacher to a Bongo(or freda) will always appear a minimum of 1 wheel size smaller than actuality"

Try it! - See ...you know its true :wink:

Ditch those standard 14" (?) wheels - go bigger (minus 1 of course) !

:lol:
Dago & Mrs D
Supreme Being
Posts: 1341
Joined: Mon Aug 08, 2005 9:41 pm
Location: Eastbourne, East Sussex
Contact:

Post by Dago & Mrs D » Wed Jan 16, 2008 8:31 am

HiddenMission, just picked up on this thread. Inresponsetoyour first posting, if you are still thinking about replacement with a set of original wheels I have 4 plus trims, with very good tyres on them available.

Where abouts are you?

Dago
Image
bigdaddycain
Supreme Being
Posts: 10637
Joined: Fri May 13, 2005 11:58 am
Location: Ince Lancs

Post by bigdaddycain » Wed Jan 16, 2008 11:21 am

bonog wrote:
1. "Bongos Law of Shrinking Alloys" states that

" Any wheel-rim attacher to a Bongo(or freda) will always appear a minimum of 1 wheel size smaller than actuality"
True dat bonog...My 18"s look iccle.... 19"s next year.... (so they'll look like 18"s! :lol: )
ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
Locked

Return to “Techie Stuff”