Page 2 of 2

Re: Help.! Ive got the hold light flashing

Posted: Sat Jul 05, 2008 2:45 pm
by bongomaan
i changed my atf the other day and i noted you said you put 5ltrs in if you cleaned the filter i think you need 6.7 ltrs to refill,just a thought.

Re: Help.! Ive got the hold light flashing

Posted: Sat Jul 05, 2008 5:11 pm
by Mr Frosty
thanks bongomaan.I topped up the fluid to fill the box.Still no joy yet though. :cry:

Re: Help.! Ive got the hold light flashing

Posted: Sat Jul 05, 2008 5:19 pm
by Boro
Hi Frosty, ive just replaced a overrun clutch solenoid after getting an error 62 message and got my local garage to fix it. Speak to these guys http://www.jpat.co.uk

Tel:

01934 852772

Very helpful, very knowledgable.

Re: Help.! Ive got the hold light flashing

Posted: Sat Jul 05, 2008 5:22 pm
by bongomaan
if you can use a multi meter check out my "is the gearbox cooled" post cos dandywarhol posted some pins to check and you may be able to self diagnose, theres a lot of gearboxes playing up at the moment,coincidence ?????

Re: Help.! Ive got the hold light flashing

Posted: Mon Jul 07, 2008 8:20 am
by ronhud
I had a hold light flashing prob shortly after buying my Freda and found some posts on here regarding 3 screws on the back of the instrument panel printed circuit. I tightened these and all was ok again.

Ron

Re: Help.! Ive got the hold light flashing

Posted: Mon Jul 07, 2008 8:25 am
by ronhud