Re. Automatic Gear stick
Moderators: Doone, westonwarrior
Re. Automatic Gear stick
Not having owned an automatic before we also wondered if it is ever necessary to use the 1st and 2nd gear and what the little button on the stick actually does?
The Goonies
The Goonies
The hold button on the stick will keep the drive in the gear you are in at the time. Useful for using the engine as a brake if going down a steep hill. Manual selection of 1 and 2 does a similar job but normally used from rest and stops the gearbox from changing up if overtaking for example. To be honest the easiest thing to do is just stick it in drive and ignore the add ons. You will soon get used to it and after becoming expert after a couple of weeks, you can then try experimenting if you feel the urge. I've been driving a diesel auto for 7 years now and have rarely bothered with holding back the gear change.
-
- Bongolier
- Posts: 446
- Joined: Sun Oct 29, 2006 9:45 pm
- Location: Idle, Bradford, West Yorkshire
- Contact:
Re: Re. Automatic Gear stick
Position D - all four gears will be used by the box and it'll lock-up at around 37 mph with a light throttle. If you press Hold it will only use gears 2 and 3 (a lot of people don't seem to realise that it can be forced to set off in second - handy for snow and loose surfaces where you don't want too much torque) if you press Hold whilst it's in 4th or locked-up it'll drop into 3rd (provides engine braking for down hill sections) don't do this at 80 mph!!The Goonies wrote:Not having owned an automatic before we also wondered if it is ever necessary to use the 1st and 2nd gear and what the little button on the stick actually does?
The Goonies
Position S - Only uses 1, 2, and 3. Pressing Hold will force it into 2nd for a more dramatic engine braking effect.
Position L - Only uses 1st and 2nd - pressing Hold causes it to lock into first, handy if you don't want to cook your brakes on extreme downhill stuff such as you might encounter, for instance, in parts of the Lake District (I'm thinking particularly of the Hardknot Pass here

Hope this helps.
-
- Bongolier
- Posts: 446
- Joined: Sun Oct 29, 2006 9:45 pm
- Location: Idle, Bradford, West Yorkshire
- Contact:
Easymikeonb4c wrote:The Hardknott Pass - now there's a distant memory. Love to try that in a Bongo



I've been over both in the Freda, and also in a Renault Traffic camper - I would NOT take the Renault over again, but would not hesitate with my trusty Freda. I think the auto-box is just superb for this type of terrain; you're never in the wrong gear




If you can point me in the direction of a site that can accomodate 30 Bongonauts, all with electric hook-up, that's open in March, then that will be the venue for next year's Tough Northerners in Vests weekend.keefysher wrote:A Bongo Bash in the Lakes ould be great.
668. The Neighbour of The Beast.
- dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh
We had a gathering of Yamaha TDMs here last year - excellent site and good restaurant
http://www.sykeside.co.uk/

http://www.sykeside.co.uk/
Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
-
- Bongolier
- Posts: 167
- Joined: Mon Jun 20, 2005 8:22 am
- Location: Coulsdon (Surrey/London)
- Contact:
Sykeside (Brotherswater) is awesome - we were there over New Year. (Two other bongos there too)
It's Not very big - might get 30 Bongos in I guess - would be really nice if we could mind...
And not particularly cheap though the location is fantastic, the food is excellent in the pub, facilities very nice etc...
Yea I'd go back there...
It's Not very big - might get 30 Bongos in I guess - would be really nice if we could mind...
And not particularly cheap though the location is fantastic, the food is excellent in the pub, facilities very nice etc...
Yea I'd go back there...
Location says where I am... I'd rather be justabout anywhere else! Suggestions or job offers of/in other parts of the UK gladly received...
- dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh
Think it was me........best acceleration can be had (IMO) by selecting L hold (1) and shifting manually just past peak torque, to S and then D - all around 2500/2750 rpm. I think the auto box holds on too long and revs too high when using D.
I only use the manual method if I want max acceleration - otherwise the normal easylazy D works just fine
I only use the manual method if I want max acceleration - otherwise the normal easylazy D works just fine

Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
-
- Supreme Being
- Posts: 10637
- Joined: Fri May 13, 2005 11:58 am
- Location: Ince Lancs
Have you ever tried pulling away holding it as near to 2500rpm until cruising speed is acheived dandy?
With delicate adjustments of the accelerator,you need never exceed 2600/2700 rpm with very smooth changes...
It doesn't do the economy any harm either
With delicate adjustments of the accelerator,you need never exceed 2600/2700 rpm with very smooth changes...
It doesn't do the economy any harm either

ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
- dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh