chromed side door grab handle

clogger · Post by **clogger** » Tue Apr 24, 2007 6:22 pm

hi peeps
got one of these here side door grab handles
but for the life of me i cannot figure out how to fit it
seem to be no bolt holes etc on the door frame had a quick shufty behind the panel ??
anyone any ideas or am i being a bit fick

cheers

waycar8 · Post by **waycar8** » Tue Apr 24, 2007 6:25 pm

not a standard part, so i dont think you will find any bolt holes so i think you will have to fabricate sumat up, someone who has one may be able to give you an idea of how they fitted theirs

francophile1947 · Post by **francophile1947** » Tue Apr 24, 2007 6:50 pm

Sorry it's not a better picture but it shows the bottom of the handle and how it's bolted to the door frame - small cut-out of the interior trim.
Hope this helps.

clogger · Post by **clogger** » Tue Apr 24, 2007 6:53 pm

yep that helps a great deal
gives me a starting point

thanks very much

Indigo · Post by **Indigo** » Wed Apr 25, 2007 7:44 am

clogger wrote:yep that helps a great deal
gives me a starting point

thanks very much

are you going to the southern softies bash this weekend? if so, come over and have a look at the one on my bongo if you like

clogger · Post by **clogger** » Wed Apr 25, 2007 1:38 pm

ta very much for the offer
i shall be at the staffordshire bike show this weekend
and setting off for a drive round poland and the ukraine the weekend after for a couple of weeks

now i`m off to play lets swap the speedo for a mph one
and maybe do the grab handle as well now i have a good idea where to smack it wiv a big hammer