Driver/Passenger light fitting removal.

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
phedders
Bongolier
Posts: 167
Joined: Mon Jun 20, 2005 8:22 am
Location: Coulsdon (Surrey/London)
Contact:

Driver/Passenger light fitting removal.

Post by phedders » Wed Mar 21, 2007 1:38 pm

Topic says it all - anyone know how to open or remove it to change the bulbs in it?

I tried pulling but it doesn't seem to want to do that and I don't want to break it :O)

--
Cheers!!!
Ozric

Post by Ozric » Wed Mar 21, 2007 2:38 pm

If your in the drivers seat push it from the side towards the passenger seat. It should move over a few mm, when it does pull your side down and it should just pop out.

I feel a video coming on :D
phedders
Bongolier
Posts: 167
Joined: Mon Jun 20, 2005 8:22 am
Location: Coulsdon (Surrey/London)
Contact:

Post by phedders » Wed Mar 21, 2007 3:51 pm

Yey! Cheers Ozric.

No need for a vid - that was dead clear. I had been pushing and pulling loads... just not laterally. DOH! And of course comes out very easily when you know how.
Locked

Return to “Techie Stuff”