Any tips on how to do this as looking to replace the rubber seal on mine!!Bongolia wrote: Thu Jul 16, 2020 11:01 pm https://www.woolies-trim.co.uk/
Hardest part is fitting it to the rear as space is really tight.
AFT (Roof) Refurb
Moderators: Doone, westonwarrior
-
- Apprentice Bongonaut
- Posts: 3
- Joined: Thu Mar 03, 2022 9:27 pm
Re: AFT (Roof) Refurb
-
- Apprentice Bongonaut
- Posts: 3
- Joined: Thu Mar 03, 2022 9:27 pm
Re: AFT (Roof) Refurb
Also when I raise the roof the small roller balls on either side no longer roll - they dragHilary Plummer wrote: Tue Aug 08, 2023 2:20 pmAny tips on how to do this as looking to replace the rubber seal on mine!!Bongolia wrote: Thu Jul 16, 2020 11:01 pm https://www.woolies-trim.co.uk/
Hardest part is fitting it to the rear as space is really tight.
Re: AFT (Roof) Refurb
Clean off any grease and oil that has been used to lubricate the tracks!! Then make sure there is no grit left behind.
The wheels roll in the track, but people tend to grease and oil them, just like the grease the road there vehicles run on (NOT)
The wheels roll in the track, but people tend to grease and oil them, just like the grease the road there vehicles run on (NOT)

Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
-
- Apprentice Bongonaut
- Posts: 3
- Joined: Thu Mar 03, 2022 9:27 pm
Re: AFT (Roof) Refurb
Thank you I’ll give that a go 
