Electric windows

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
callaway

Electric windows

Post by callaway » Wed Feb 21, 2007 7:39 pm

Hi
I have a problem with electric windows. My driver window electic window will not work and also will not operate the passenger side (although the passenger side operates from it's own switch. Does the drivers side switch box have it's own fuse and if so how do I identify it in the fuse box? Any other ideas much appreciated.
John from Devon
francophile1947
Supreme Being
Posts: 11354
Joined: Mon Dec 18, 2006 6:15 pm
Location: Norwich

Post by francophile1947 » Wed Feb 21, 2007 8:11 pm

A broken wire, between the door and body, is a frequent problem with the windows.
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
User avatar
dandywarhol
Supreme Being
Posts: 5446
Joined: Mon Dec 19, 2005 10:18 pm
Location: Edinburgh

Post by dandywarhol » Wed Feb 21, 2007 8:37 pm

So is a dry solder joint in the circuit board in the driver's switch.............
Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
David Edwards
Supreme Being
Posts: 4100
Joined: Sat Oct 16, 2004 6:37 pm
Location: Aberdare south wales

Post by David Edwards » Thu Feb 22, 2007 1:06 am

If you are going to check the wires from the car thru the door pillar, be careful, when you have removed the corrugated cover there are loads of very thin wires each of which have to be examined very carefully as a break may not be obvious, as I found when my central locking stopped working, There is not a lot of play in the wires either and they are bloody awkward to get at too. Good luck and hope it sorts soon. Happy motoring.
cezeta

Post by cezeta » Sat Feb 24, 2007 12:50 pm

i have the same problem, i bought a new switch and its the same so must be the the door loop.

the electric mirror has stopped working too.

is the loop part of the loom or can that section be replaced?
cezeta

Post by cezeta » Sat Feb 24, 2007 6:10 pm

i just stripped the hinge loop to find 3 wires broken. i will solder them up tomorrow so an easy fix :wink:
Locked

Return to “Techie Stuff”