Oil Light Sender unit - Bongo V6
Moderators: Doone, westonwarrior
-
- Bongolier
- Posts: 185
- Joined: Fri Sep 04, 2015 7:32 pm
Oil Light Sender unit - Bongo V6
Probably basic to some but can some one tell me where I locate the oil light sender unit on a V6.
Re: Oil Light Sender unit - Bongo V6
Part 18-501 here http://www.lushprojects.com/bongopartsm ... no=.html#3
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
-
- Bongolier
- Posts: 185
- Joined: Fri Sep 04, 2015 7:32 pm
Re: Oil Light Sender unit - Bongo V6
Thanks again Geoff.
-
- Bongolier
- Posts: 185
- Joined: Fri Sep 04, 2015 7:32 pm
Re: Oil Light Sender unit - Bongo V6
I was hoping I could locate the wire from the sender unit under the seat area as opposed to laying on the floor.
(have a job getting back these days after falling from a tree a few years back). I am trying to connect my TM4
to the oil sender.
(have a job getting back these days after falling from a tree a few years back). I am trying to connect my TM4
to the oil sender.
Re: Oil Light Sender unit - Bongo V6
The signal is available at the dashboard as the sender feeds the light directly, sending it an eaarth to light the lamp. Pin 3H on dashboard connectors


Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
-
- Bongolier
- Posts: 185
- Joined: Fri Sep 04, 2015 7:32 pm
Re: Oil Light Sender unit - Bongo V6
Perfect, thank you.