Torque setting water pump 2.0

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
User avatar
knpenny
Bongolier
Posts: 221
Joined: Wed Feb 21, 2018 8:39 pm
Location: Franche comte
Contact:

Torque setting water pump 2.0

Post by knpenny » Mon Mar 26, 2018 8:09 pm

Just a quick one, does anyone have torque settings for 2.0 water pump? [-o<

p.s the guide for rocker cover gasket in archives was excellent. 150kms down and no leak :D full service done but just the timing belt, water pump, 2 aux belts (which are looking very weathered) :oops: and the coolant to do. so far all is well.
thanks for all the advice people =D> by the way 10lts dexron 3. not cheap :cry: but sooooo worth it :lol:
Bongology, the study of all things bong. The bongologist. :shock:
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: Torque setting water pump 2.0

Post by teenmal » Tue Mar 27, 2018 11:57 am

19-24nm.

Take care.
User avatar
knpenny
Bongolier
Posts: 221
Joined: Wed Feb 21, 2018 8:39 pm
Location: Franche comte
Contact:

Re: Torque setting water pump 2.0

Post by knpenny » Sun Apr 01, 2018 12:37 pm

superb thats perfect. Thanks again teenmal =D>
p.s much sucsess with the rocker gasket, done 400km since i changed it with no leak at all. Though i had to order a ht lead no 4 as oil ingress had swollen and damaged it. and also discovered a slight leak from the oilsump but thats all good as next week was planning on doing the gearbox seal and fluid so might as well make it a double job while i am there. :D

again thanks for the info will get back to you with results of all.
Bongology, the study of all things bong. The bongologist. :shock:
Post Reply

Return to “Techie Stuff”