Hello,
So i've got an intermittent issues with my horn see....
http://igmaynard.co.uk/bongo/forum/view ... 90#p693874
I'm just wondering how to remove the squishy steering wheel cover to get access to any wiring / horn elements to give it a clean
I'm worried about about affecting the airbag, any advice on how to remove this squishy cover OR should i leave it alone?
Cheerios x x
Removing Steering wheel cover (V6)
Moderators: Doone, westonwarrior
- Northern Bongolow
- Supreme Being
- Posts: 7722
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: Removing Steering wheel cover (V6)
remove the battery terminals then sit with your foot on the footbrake for 6 hours till the lights exhaust the ecu battery, then its safe to remove the airbag.
.
note in the drawing below there are 2 screws one either side.
http://lushprojects.com/bongopartsmk2/c ... mgno=.html



note in the drawing below there are 2 screws one either side.
http://lushprojects.com/bongopartsmk2/c ... mgno=.html
Re: Removing Steering wheel cover (V6)
Seriously six hours!!!?
- Northern Bongolow
- Supreme Being
- Posts: 7722
- Joined: Mon Mar 15, 2010 11:33 pm
- Location: AKA Vanessa
Re: Removing Steering wheel cover (V6)
no.
remove the battery terminals, footbrake till the lights go out then wait 5-10 mins, you should be ok then
.





