Rear Fog Light

Scratch · Post by **Scratch** » Sat Sep 17, 2016 12:24 pm

I have read the Fact sheet and found somebody who will fit the dangly fog light in the bumper. From the pictures this will mean that the light is not flush with the bumper. Has anybody bought a flat fog light and if so where from?

rita · Post by **rita** » Sat Sep 17, 2016 12:32 pm

This might help...

https://www.google.co.uk/webhp?sourceid ... n%20bumper

Post by **Bob** » Sat Sep 17, 2016 4:12 pm

Front or rear?

Flush rears are no more work, same price and a much better job.

peridot · Post by **peridot** » Sat Sep 17, 2016 10:56 pm

I was thinking of using one of these:

http://www.ebay.co.uk/itm/221470609431? ... EBIDX%3AIT

Not quite flush but easier to fit.

Scratch · Post by **Scratch** » Sun Sep 18, 2016 4:35 pm

I have ordered one of these. It looks like just what I wanted.
http://www.ebay.co.uk/itm/131936756693

Jimbobvfr400 · Post by **Jimbobvfr400** » Mon Sep 19, 2016 1:06 pm

You could think about converting the right hand reverse light to the fog light. Much neater.

callum · Post by **callum** » Mon Sep 19, 2016 1:44 pm

I swapped out my reverse light to fit the fog into it, i also had a dangly one.
The only thing i find is that when parking at night, with the privacy glass, it is quite a lot darker (50% probably!!) With only the one light. I did put a cree LED into the reverse which helped.
But i am happy i went that way.

Rear Fog Light

Rear Fog Light

Re: Rear Fog Light

Re: Rear Fog Light

Re: Rear Fog Light

Re: Rear Fog Light

Re: Rear Fog Light

Re: Rear Fog Light