What coolant?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Adscan
Junior Bongonaut
Posts: 22
Joined: Wed Dec 30, 2015 12:16 pm

What coolant?

Post by Adscan » Mon Jul 04, 2016 2:13 pm

I am going to replace the four main coolant hoses soon and give it a flush through. What coolant should i use..red or blue?
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: What coolant?

Post by Northern Bongolow » Mon Jul 04, 2016 11:14 pm

blue boils at a lower temp than red, red needs doing before 5 years, instead of 2 year blue. also the red is usually OAT BASED so is best for the ally head/rad etc.

theres a good short blurb here.

http://www.pistonheads.com/gassing/topic.asp?t=775655.

or if you really want to know it all try this. :)

https://en.wikipedia.org/wiki/Antifreeze
User avatar
cmm303
Supreme Being
Posts: 1665
Joined: Mon Jan 07, 2013 8:10 pm
Location: Chippenham, Wiltshire

Re: What coolant?

Post by cmm303 » Tue Jul 05, 2016 9:30 am

If you change coolant type (OAT vs non-OAT) the old must be thoroughly flushed out. They don't mix well.

OAT antifreeze will also cause false alarms with an LCA, if fitted, over the first couple of weeks. Resolved by cleaning or replacing the screw in the expansion tank. This isn't a bad thing, just a side affect of the protective coating that OAT antifreeze deposits.
Chris with BertieB
'96 White unconverted AFT 2.5L Diesel 4WD
Post Reply

Return to “Techie Stuff”