Rear anti roll bar removal

Gripped · Post by **Gripped** » Tue Oct 20, 2015 11:13 pm

Planning to remove and repaint as its pretty rusty.

It looks like it should be easy enough if the bolts undo. Is there anything I should be aware of? Is the ARB under tension?

Cheers

Northern Bongolow · Post by **Northern Bongolow** » Wed Oct 21, 2015 3:40 am

no. just undo it mate. soak yer nuts first though, if they break off then you have to drill them out and fit new bolts, not a 2 min job. if your fitting new rubbers then just warm em up with a blow lamp then wire brush them clean first, then spray.

Titan1995 · Post by **Titan1995** » Wed Oct 21, 2015 8:54 am

Good idea to replace all the rubbers, brackets and drag links at the same time.

Did mine a couple of months ago as one of the brackets had failed.

Gripped · Post by **Gripped** » Wed Oct 21, 2015 10:58 am

The rubbers and links are pretty new so I'll clean them up.

Thanks for the tips !

Rear anti roll bar removal

Rear anti roll bar removal

Re: Rear anti roll bar removal

Re: Rear anti roll bar removal

Re: Rear anti roll bar removal