temperature gauge stuck.

Dodgey · Post by **Dodgey** » Sat Sep 20, 2014 9:52 am

My gauge starts at 1/3rd, even when cold and pretty much stays there.

I have a modified gauge I think. I have a small black box under the dash with a screw adjustment for the alarm based on temperature.

First thing to check. Sender?

Post by **Simon Jones** » Sat Sep 20, 2014 10:04 am

The box you describe sounds like a Mason alarm. Very good little unit and not known to be problematic. You could disconnect it to eliminate it being the cause. I've probably got the wiring details somewhere if you need it.

Dodgey · Post by **Dodgey** » Sat Sep 20, 2014 10:23 am

Yeah. I'll test the sender first. I'm guessing I'm looking for something plugged into the rad.?

mikeWalsall · Post by **mikeWalsall** » Sat Sep 20, 2014 11:24 am

No ..

It's a device connected to the temp guage to buffer / and manualy adjust a pre set temp alarm ...

http://www.townace.plus.com/ie/ietefibo.pdf

Sadly though .. no longer available ..

rita · Post by **rita** » Sat Sep 20, 2014 12:42 pm

Dodgey wrote:Yeah. I'll test the sender first. I'm guessing I'm looking for something plugged into the rad.?

The sensor/sender is situated at the top front o/s of the cylinder head.

18-510 here.

http://lushprojects.com/bongopartsmk2/c ... mgno=.html

teenmal · Post by **teenmal** » Sat Sep 20, 2014 12:59 pm

Dodgey, what setting is the unit set at,I think this unit has an OFF switch,don't know if the off switch would cause this reading.

temperature gauge stuck.

temperature gauge stuck.

Re: temperature gauge stuck.

Re: temperature gauge stuck.

Re: temperature gauge stuck.

Re: temperature gauge stuck.

Re: temperature gauge stuck.