Clear plastic on corners under AFT

TheStinkyHippy · Post by **TheStinkyHippy** » Wed Sep 17, 2014 4:11 pm

So, Billy has some rust, so I am starting to treat the spots and I am going to respray the areas to generally tart it up.
First area is the the roof area and gutter.

The gutter is mostly orange, so that is getting Kurust treatment and then a rub down and spray..

but, under the roof the corners have a bit of rust..

but they also have a plastic strip stuck down.

To treat the rust I needed to remove these (I used a heat gun and lots of broken finger nails)

Any idea what these do?
Should I replace them?

Thanks as always for great helpful people.

Mark Elvin · Post by **Mark Elvin** » Wed Sep 17, 2014 4:15 pm

Cut some from this

http://www.ebay.co.uk/itm/Clear-Gloss-S ... 3cd122e6ff

roosmith · Post by **roosmith** » Wed Sep 17, 2014 4:19 pm

Agree with Mark, just looks like some protective strip to stop the roof rubbing.

Gasy · Post by **Gasy** » Wed Sep 17, 2014 5:19 pm

Didn't stop the rust over the years so I wouldn't bother putting it back

Clear plastic on corners under AFT

Clear plastic on corners under AFT

Re: Clear plastic on corners under AFT

Re: Clear plastic on corners under AFT

Re: Clear plastic on corners under AFT