Technical questions and answers about the Mazda Bongo
Moderators: Doone, westonwarrior
-
samuel
- Bongolier
- Posts: 485
- Joined: Fri Jan 21, 2005 11:37 pm
- Location: Polgooth, Cornwall
Post
by samuel » Wed Jan 10, 2007 11:36 pm
This request is for non-member who is having awful problems with his overheating Bongo.
The Bongo is still overheating after all the following actions have been taken:
Water pump works fine
- thermostat has been tested and works fine
brand new radiator
Has anybody suffered a similar problem? Any help would be most apppreciated.
"Living the Dream"
-
Ozric
Post
by Ozric » Wed Jan 10, 2007 11:43 pm
I fitted my own rad and followed the instructions on filling in the members area. Not had a problem in almost a year. But didn't have a overheating problem in the first place, it only started when the rad went bang or rather splurt

-
Ian
- Supreme Being
- Posts: 5982
- Joined: Wed Jun 09, 2004 2:47 pm
- Location: Bongo Mission Control
Post
by Ian » Wed Jan 10, 2007 11:46 pm
Samuel, I take it you have had the coolant system bled according to the proper procedures to avoid the airlock, and have consulted all the data at
http://www.igmaynard.co.uk/bongo/forum/ ... php?t=6857
668. The Neighbour of The Beast.
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
-
Contact:
Post
by mikeonb4c » Thu Jan 11, 2007 12:21 am
As above + does it happen more when in traffic than on the open road and/or is the scavenge pump cutting in properly when required (the fan you can see when you open the engine covers, beats me why it is so named)?
-
dandywarhol
- Supreme Being
- Posts: 5446
- Joined: Mon Dec 19, 2005 10:18 pm
- Location: Edinburgh
Post
by dandywarhol » Thu Jan 11, 2007 12:23 am
So it scavanges the hot air out of the engine bay so you don't cook in hot weather.........................

Whale oil beef hooked
Renault Lunar Telstar
Yamaha TD1C 250, Merc SLK200, KTM Duke 690
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
-
Contact:
Post
by mikeonb4c » Thu Jan 11, 2007 12:38 am
Ah so Engrishman

-
samuel
- Bongolier
- Posts: 485
- Joined: Fri Jan 21, 2005 11:37 pm
- Location: Polgooth, Cornwall
Post
by samuel » Thu Jan 11, 2007 12:01 pm
Thanks for your replies guys.
I'll ask him if he has bled the system thoroughly as this seems top of the list at the moment.
Cheers.
Tim
"Living the Dream"
-
Bumbly1
Post
by Bumbly1 » Thu Jan 11, 2007 6:32 pm
You also dont mention if he has flushed the sytem through properly. It is the sludge in the system that causes the problem and if it is still there, no end of replacement parts will fix it, nor will bleeding. The goo gets stuck in the pipes, particularly the rear wee heater radiators and will foil the most adept bleeder

.
-
Peg leg Pete
- Supreme Being
- Posts: 2910
- Joined: Thu Aug 25, 2005 7:07 pm
- Location: Yorkshire
Post
by Peg leg Pete » Thu Jan 11, 2007 10:42 pm
Tom I agree with you, system needs to be completely free of gunge.

Pete
-
samuel
- Bongolier
- Posts: 485
- Joined: Fri Jan 21, 2005 11:37 pm
- Location: Polgooth, Cornwall
Post
by samuel » Thu Jan 11, 2007 10:42 pm
Thanks Bumbly1
Will make sure that avenue has been checked as well.
Cheers
Tim
"Living the Dream"
-
Chris P
Post
by Chris P » Thu Jan 11, 2007 10:46 pm
Bumbly1 wrote:You also dont mention if he has flushed the sytem through properly. It is the sludge in the system that causes the problem and if it is still there, no end of replacement parts will fix it, nor will bleeding. The goo gets stuck in the pipes, particularly the rear wee heater radiators and will foil the most adept bleeder

.
Yeah - I had a radiator replaced and it then showed most erratic overheating behaviour. I searched for past discussions of this, and told my garage to flush the system. They did (and then did the correct bleeding procedure) and it has been fine for the past six months.
Cheers
Chris