Hi guys I have the dreaded hold light flash for quite a while on my V6. Tracked the fault code down to 6 or 60 replaced the output speed sensor no joy so have forked out for a replacement shift solenoid kit (JPAT reasonable price, great service)
Thought I would try my hand and changing them myself, all looked straight forward Now I'm stuck on which bolts to undo to lower the valve body (sounded easy on the mazda bongo.com website)
Can anyone help with a diagram or advice on which bolts to undo? I don't want to take the wrong ones out
kind regards
Rob
Gearbox solenoid
Moderators: Doone, westonwarrior
-
rjduncanuk
- Junior Bongonaut
- Posts: 22
- Joined: Wed Apr 17, 2013 4:38 pm
-
rjduncanuk
- Junior Bongonaut
- Posts: 22
- Joined: Wed Apr 17, 2013 4:38 pm
Re: Gearbox solenoid
help
Re: Gearbox solenoid
Alacrity is the guy you need, I think the rest of us are at the Bash!
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
-
rjduncanuk
- Junior Bongonaut
- Posts: 22
- Joined: Wed Apr 17, 2013 4:38 pm
Re: Gearbox solenoid
Ok thanks