How to tell if a Bongo has ABS or not

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Fluff2005
Apprentice Bongonaut
Posts: 9
Joined: Thu Oct 03, 2013 11:34 am

How to tell if a Bongo has ABS or not

Post by Fluff2005 » Sun Feb 23, 2014 2:28 pm

Hi all,

I have what may be a ridiculous question. I have a 96 v6 E-SG5W model. I looked up the model and ABS was an optional extra. I have no ABS light on the dash (none that I can see and none that lights up when I start the van). There is also no perceivable brake pedal judder either when I brake hard. Basically I want to know if it has ABS and someone deactivated it due to a fault or it never had ABS to begin with (ironically my preferred result!).

Thanks
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: How to tell if a Bongo has ABS or not

Post by Simon Jones » Sun Feb 23, 2014 2:39 pm

You would have an ABS pump under the bonnet - don't remember exactly where it is although I seem to recall its on the passenger side bulkhead somewhere.

This is what it looks like: http://www.ebay.co.uk/itm/Mazda-Bongo-a ... 3a8b87ea10
Fluff2005
Apprentice Bongonaut
Posts: 9
Joined: Thu Oct 03, 2013 11:34 am

Re: How to tell if a Bongo has ABS or not

Post by Fluff2005 » Sun Feb 23, 2014 2:58 pm

I am pretty sure I have not seen the pump as pictured on Ebay. I will double check though.

Thanks
the laird
Supreme Being
Posts: 1198
Joined: Tue Aug 28, 2012 12:28 pm
Location: West lothian

Re: How to tell if a Bongo has ABS or not

Post by the laird » Sun Feb 23, 2014 3:08 pm

If you look around the area under the heater fan plastic cowl under the bonnet.also look behind your road wheels as the driveshaft goes through the hub you'll see a ring with teeth on it this is the abs ring.when you turn the ign on there should be a light that illuminates for 15/30seconds then goes off once started.to test abs on a road with NO vehs behind you go to about 20mph and stand on foot brake and the pedal should (rattle)under your foot ie judder this is the abs in operation
Fluff2005
Apprentice Bongonaut
Posts: 9
Joined: Thu Oct 03, 2013 11:34 am

Re: How to tell if a Bongo has ABS or not

Post by Fluff2005 » Sun Feb 23, 2014 6:08 pm

Hi, yep, found it. It does not have the black covering on it but given it's says "Nippon ABS Ltd" it gives it away a bit. Shouldn't the ABS light come on when you first turn the ignition on and then go off once the engine has started?

Thanks
Fluff2005
Apprentice Bongonaut
Posts: 9
Joined: Thu Oct 03, 2013 11:34 am

Re: How to tell if a Bongo has ABS or not

Post by Fluff2005 » Sun Feb 23, 2014 6:12 pm

Hi, sorry, I just seen "the Lairds" post. No, no light comes on. I have never had any brake judder however I must admit I do not think I have ever stamped on the brakes that hard. I will try it but I am thinking it's been disabled. I am concerned about opening up a can of worms.... :-(

Yes, the "ring of teeth" are there also.

Thanks
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: How to tell if a Bongo has ABS or not

Post by Northern Bongolow » Sun Feb 23, 2014 6:20 pm

under the bonnet is a fuse for abs, check its in place etc. non abs bongo's still have the place for a fuse but is not fitted.
Fluff2005
Apprentice Bongonaut
Posts: 9
Joined: Thu Oct 03, 2013 11:34 am

Re: How to tell if a Bongo has ABS or not

Post by Fluff2005 » Sun Feb 23, 2014 7:35 pm

Yep, will do. Fingers crossed its nothing serious. Thanks
User avatar
g8dhe
Supreme Being
Posts: 10754
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.

Re: How to tell if a Bongo has ABS or not

Post by g8dhe » Sun Feb 23, 2014 10:16 pm

There are TWO fuses required;
The first one powers the actuators
Image
and below powers the electronics.
Image

We have ABS and the only time its been noticed is on an icy hill, it should only operate when the two wheels are turning at different speeds and breaking is underway.
Geoff
2001 Aero V6, AFT, full side conversion.
Post Reply

Return to “Techie Stuff”