Hello
I noticed that the white plastic dial in the driver footwell has one of the metal bars loose. I tried to put it back in but the clip that holds it is broken off.
Any ideas on a good repair?
Heater Control (driver Footwell)
Moderators: Doone, westonwarrior
Re: Heater Control (driver Footwell)
A cable tie or a piece of wire wrapped around it usually does the trick.
- helen&tony
- Supreme Being
- Posts: 9869
- Joined: Thu Nov 18, 2004 12:49 pm
- Location: Bulgaria
Re: Heater Control (driver Footwell)
Hi
Or push-rod clips from the model shop for servos
Cheers
Helen
Or push-rod clips from the model shop for servos
Cheers
Helen
In the beginning there was nothing , then God said "Let there be Light".....There was still nothing , but ,by crikey, you could see it better.