Lights on bullbar

[kingbillybongo]

Can any one give me any tips on how to wire in spot lights on a bullbar
Many thanks in advance. ( Electrical novice )

[francophile1947]

They have to be wired to only come on with the main beam headlamps

[helen&tony]

Hi
Are they the Mazda Cibie yellow ones , original equipment accessory type? as if so, they are foglights, not spots, and not spots....so, as such, they would need wiring in to switch on with dipped beam
Cheers
Helen

[Dr Fingers]

If they're yellow fogs, then they should surely be wired to come on with the other fog lights??

I have the Cibies. Unfortunately I assumed it was the bulbs that are yellow, but actually it's in the glass. I want mine on full beam with white light for extra full beam power, so will have to change the Cibies for something else. I also have them wired to their own on/off switch on the dash, so I can use them only when really necessary.

Derek

[helen&tony]

Hi Derek
The yellow Cibie fogs are clear glass,but there is a little glass or plastic capsule which fits over the bulb which makes them yellow. They're actually quite good as fogs, and you could have a selector switch to choose which pair you want on....the low ones in the bumper, or the ones on the Bullbar. I replaced my Cibies with a pair of KC Daylighters spotlamps...very nice at 100 watts each and driving light pattern....essential over here as there are no road markings or street lights in the country
Cheers
Helen