Problem With Heater Blower

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
David Lee

Problem With Heater Blower

Post by David Lee » Wed Dec 27, 2006 6:58 pm

The fan on my my Bongo works fine but the draft only comes out of the dash level vents. Its got the electronic type heater/ac control, the little picture shows an arrow pointing at the feet or up at the windscreen but nothing comes out.

Any idea's what the problem could be ?
neil/di
Bongolier
Posts: 471
Joined: Wed May 10, 2006 4:52 pm
Location: Hadlow Down East Sussex

Post by neil/di » Wed Dec 27, 2006 8:24 pm

Have you tried pushing the mode button on the unit,this changes the direction of the air flow
Neil
A Bongos is not just for christmas
neil/di
Bongolier
Posts: 471
Joined: Wed May 10, 2006 4:52 pm
Location: Hadlow Down East Sussex

Post by neil/di » Wed Dec 27, 2006 8:28 pm

If that dose not work if you look above the pad that you rest your left foot on,above that and to your left you will see a number of plastic crescent shaped cogs,you will find that one of the metal rods has come adrift.
Hope this is of help
Neil
A Bongos is not just for christmas
David Lee

Post by David Lee » Sat Dec 30, 2006 9:52 pm

Cheers Neil/di for your help.

As described metal rod had come adrift. I assume something was meant to hold it in place but what it was seem to be missing on mine.

Am sure I can fabricate something out of a bit of plastic.

Thanks again for you help.
neil/di
Bongolier
Posts: 471
Joined: Wed May 10, 2006 4:52 pm
Location: Hadlow Down East Sussex

Post by neil/di » Sat Dec 30, 2006 10:39 pm

Try some super glue and a tiddlywink :lol:
A Bongos is not just for christmas
Locked

Return to “Techie Stuff”