Fog Lights

[Neildeb68]

Boingo has no fog lights only covers. My question is, is the wiring for these installed in the factory so i just plug and play or will they need to be wired in ?
Thanks
Neil

[the1andonly]

I have no fog lights or cover just open holes.
just had a look for surplus wiring going nowhere.
on lhs i found a connector attached to 3 wires coming out of the loom. This connector is firmly attached to the bulkhead below and to the right of headlamp. I cant get to rhs to look.
Maybe what you want but real experts will be on their way

[the1andonly]

try

http://www.igmaynard.co.uk/bongo/forum/ ... hts+wiring

[helen&tony]

Hi
It's easy enough to add your own wiring...it'll be all new, and you won't have to phaff about and find where the problem is in a bunch of old wires with connectors that have been hanging around in the elements and corroding....There are a couple of e-Bay sellers who flog kits with all the hardware for fitting lamps...I'll dig 'em out if you wish, but I would just go to the local shop, and buy cable which is suitably rated, a switch, a fuse and holder, and a relay....and something to tack the cables out of the way....your choice of fixing...something shiny and fluorescent will do nicely to please Mr. MOT man
Cheers
Helen

[Neildeb68]

Thanks all looking at the LED route

[stuc]

I have no fog lights or cover just open holes.
just had a look for surplus wiring going nowhere.
on lhs i found a connector attached to 3 wires coming out of the loom. This connector is firmly attached to the bulkhead below and to the right of headlamp. I cant get to rhs to look.

Mines also got this connector, mines got lamps but not wired up, it would be good if this was the wiring.