Hi all,
I want to fit the Ring micro-line front fog lights which i know fit into the bumper cut outs. I will have to make up some brackets which is ok, but i want to use the original screw holes at the back of the cut outs.
My question is, are they special screws or will small self tappers work ok?
Any advice or suggestions would be great.
Thanks in advance
Barry
Front foglight Screws
Moderator: Ian
-
helen&tony
- Supreme Being
- Posts: 9869
- Joined: Thu Nov 18, 2004 12:49 pm
- Location: Bulgaria
Re: Front foglight Screws
Hi
Large flat-head flanged coarse thead self-tappers in black plate...available from most motor stores...I bought 10 each of a couple of diameters...Easy...
Cheers
Helen
Large flat-head flanged coarse thead self-tappers in black plate...available from most motor stores...I bought 10 each of a couple of diameters...Easy...
Cheers
Helen
In the beginning there was nothing , then God said "Let there be Light".....There was still nothing , but ,by crikey, you could see it better.
Re: Front foglight Screws
helen&tony wrote:Hi
Large flat-head flanged coarse thead self-tappers in black plate...available from most motor stores...I bought 10 each of a couple of diameters...Easy...
Cheers
Helen
Thanks very much Helen, i know exactly what you mean. Gotta love this forum everyone takes time to help if they can. As a newbie cant help much with anything at the moment,but that will change as time goes on (hopefully).
Thanks
Barry