Caster / Castor Angle

Basher · Post by **Basher** » Fri May 31, 2013 12:23 pm

I had my bongo in for laser alignment, because of uneven tyre wear. The caster angle is out for one wheel (the one with the wear). They say that you can't adjust the caster angle.

Is this true? If so what can I do?

teenmal · Post by **teenmal** » Fri May 31, 2013 1:41 pm

Hi Basher,did the garage check the bottom ball joint/bushes/wheel bearing/strut bearing.

Good luck.

Northern Bongolow · Post by **Northern Bongolow** » Fri May 31, 2013 11:17 pm

the front arm-----34-310 in the link below can bend.

34-390 has a bearing in the top, these can seize solid or even collapse.

http://lushprojects.com/bongopartsmk2/c ... o=.html#13

Basher · Post by **Basher** » Mon Jun 03, 2013 9:13 am

Thanks guys, The Bongo is in for an MOT/service on Wednesday I will speak to them then.

Many Thanks

Stephen

The Great Pretender · Post by **The Great Pretender** » Wed Jun 05, 2013 1:10 am

Intriguing, how does the laser alignment check caster?

Basher · Post by **Basher** » Wed Jun 05, 2013 8:06 am

This explains what they claim to do. They actually had all the data for the Bongo in their database.

http://www.alignmycar.co.uk/WheelAlignm ... nceTandFWA

Caster / Castor Angle

Caster / Castor Angle

Re: Caster / Castor Angle

Re: Caster / Castor Angle

Re: Caster / Castor Angle

Re: Caster / Castor Angle

Re: Caster / Castor Angle