Hi,
Has anyone out there ever had to fit a new ATF roof seal? If so where would I source one, and is it a difficult job to replace one?
Cheers
Richard
ATF Roof Seal
Moderators: Doone, westonwarrior
-
windywatson
- Tribal Elder
- Posts: 506
- Joined: Mon Feb 04, 2008 9:21 pm
- Location: Lincoln
ATF Roof Seal
Windy-Watson
2001 V6 Tin Top
2001 V6 Tin Top
-
helen&tony
- Supreme Being
- Posts: 9869
- Joined: Thu Nov 18, 2004 12:49 pm
- Location: Bulgaria
Re: ATF Roof Seal
Hi
After a lot of chasing round, Kirsty got one from a local Mazda dealer quite reasonably...in fact, cheaper than some rubber moulding companies-try 'phoning a few???
Cheers
Helen
After a lot of chasing round, Kirsty got one from a local Mazda dealer quite reasonably...in fact, cheaper than some rubber moulding companies-try 'phoning a few???
Cheers
Helen
In the beginning there was nothing , then God said "Let there be Light".....There was still nothing , but ,by crikey, you could see it better.
Re: ATF Roof Seal
Hi,your mazda dealer should be able to supply,part No S10K69825A.
You will need to give them your VIN as there are variations.
You will need to give them your VIN as there are variations.
-
helen&tony
- Supreme Being
- Posts: 9869
- Joined: Thu Nov 18, 2004 12:49 pm
- Location: Bulgaria
Re: ATF Roof Seal
Hi
I must remember that number...mine's looking miserable and sad
Cheers
Helen
I must remember that number...mine's looking miserable and sad
Cheers
Helen
In the beginning there was nothing , then God said "Let there be Light".....There was still nothing , but ,by crikey, you could see it better.
Re: ATF Roof Seal
Saw this on Ebay they may have something suitable?
http://compare.ebay.co.uk/like/17080559 ... pla&crdt=0#
http://compare.ebay.co.uk/like/17080559 ... pla&crdt=0#
1995 Ford Freda 2.5 TD 4x4 AFT