comments on radiator and fan resistor faq

[wonkanoby]

ive been having fun and thought the following might help others


radiator

i found that 1/4 drive extensions,the end that fits the ratchet

are just perfect to plug the oil cooler pipes to save wasting the oil


fan resistor

there is a large copper link piece on the lower side of the pcb

on mine it had come unsoldered,not sure if it was just this as removal buggers up the transisor any way

note you have to unsolder the 3 legs in order to remove the pcb dont try just pulling

http://www.dalbani.co.uk/catalogue/prod ... hp?id=4939

is a direct link to the transistor on the site mentioned in the faq