Fitting VisualPerformance Plasma dials and controls...
Moderator: Ian
Fitting VisualPerformance Plasma dials and controls...
I really like the look of this kit, I'd like to get it installed. However, I'm worried I don't have the skills or aptitude, or both. I've read the threads on here, and although informative, I could struggle and end up with a bag of bits, loads of chopped up wiring and an undriveable Bongo.
I was wondering, could someone who has done it before help me fit these items? Would pay by cash or beer or whatever.
Cheers.
Chris.
I was wondering, could someone who has done it before help me fit these items? Would pay by cash or beer or whatever.
Cheers.
Chris.
-
- Supreme Being
- Posts: 1975
- Joined: Sat Oct 03, 2009 6:52 pm
- Location: Newcastle under Lyme, Staffordshire
Re: Fitting VisualPerformance Plasma dials and controls...
Have a go, you'll surprise yourself DBO fitted mine with me looking on so would like to think I could fit these.
P.s get the chrome dial discs aswell as they really finnish it off
http://www.igmaynard.co.uk/bongo/forum/ ... asma+dials
P.s get the chrome dial discs aswell as they really finnish it off
http://www.igmaynard.co.uk/bongo/forum/ ... asma+dials
Bongo no more........... ;-(
Re: Fitting VisualPerformance Plasma dials and controls...
They look OK actually, where are they from?dandemann8 wrote:Have a go, you'll surprise yourself DBO fitted mine with me looking on so would like to think I could fit these.
P.s get the chrome dial discs aswell as they really finnish it off
http://www.igmaynard.co.uk/bongo/forum/ ... asma+dials
Cheers.
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Fitting VisualPerformance Plasma dials and controls...
Some here, although £26 with postage seems a little steep: http://www.ebay.co.uk/itm/MAZDA-BONGO-M ... 4607292934
Re: Fitting VisualPerformance Plasma dials and controls...
Bongo isn't actually listed, what's it the same as?Simon Jones wrote:Some here, although £26 with postage seems a little steep: http://www.ebay.co.uk/itm/MAZDA-BONGO-M ... 4607292934
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Fitting VisualPerformance Plasma dials and controls...
The title mentions Bongo, but it's the same instrument panel as similar vintage Mazda 626's (which is where the GA5R speedo comes from if you want to do a proper conversion to MPH)
Re: Fitting VisualPerformance Plasma dials and controls...
So any of these ... MK IV [1991-1997] ... should be OK?
- Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
Re: Fitting VisualPerformance Plasma dials and controls...
The list just there to show you which models they are compatible with, rather than you ordering for a specific model. The dash shown in the photo is same as the Bongo and it's mentioned in the title of the listing, so it hey ought to fit perfectly
- daveblueozzie
- Supreme Being
- Posts: 5922
- Joined: Tue Feb 20, 2007 9:25 pm
- Location: North West.
Re: Fitting VisualPerformance Plasma dials and controls...
The dials and chrome rings are very easy to fit, they also do the manual heater control and the auto gear shift in the plasma.
I found connecting the wires to the bulb that lights the ash tray up the simplest, as this lights up when you put the side light on. (you might have to extend the wire)
When you take the dials out why not spray the black surround a different colour, i did mine in silver.
You do not need to take the needles off the dials, the new plasma dials slide over them.
I found connecting the wires to the bulb that lights the ash tray up the simplest, as this lights up when you put the side light on. (you might have to extend the wire)
When you take the dials out why not spray the black surround a different colour, i did mine in silver.
You do not need to take the needles off the dials, the new plasma dials slide over them.
Last edited by daveblueozzie on Sun Nov 18, 2012 10:37 pm, edited 3 times in total.
Lost without my Bongo.
Re: Fitting VisualPerformance Plasma dials and controls...
Got a picture of that anywhere mate?daveblueozzie wrote:The dials and chrome rings are very easy to fit, they also do the manual heater control and the auto gear shift in the plasma.
I found connecting the wires to the bulb that lights the ash tray up the simplest, as this lights up when you put the side light on.
When you take the dials out why not spray the black surround a different colour, i did mine in silver.
Re: Fitting VisualPerformance Plasma dials and controls...
Sorry, pictures weren't showing before.Chris-W wrote:Got a picture of that anywhere mate?daveblueozzie wrote:The dials and chrome rings are very easy to fit, they also do the manual heater control and the auto gear shift in the plasma.
I found connecting the wires to the bulb that lights the ash tray up the simplest, as this lights up when you put the side light on.
When you take the dials out why not spray the black surround a different colour, i did mine in silver.
- jimpearceuk
- Bongolier
- Posts: 146
- Joined: Wed Oct 20, 2010 10:28 pm
- Location: Berkshire
Re: Fitting VisualPerformance Plasma dials and controls...
Chris, if you ever in the Berkshire area let me know and you can drop in and I will do it with you - its not a big job. cheers Jim