Crank pulley

[Andy W]

Recently i have noticed a metallic rattle when the engine is running so had a look today and found that the crank pulley has separated with the back half coming away from the rubber mount. Question is. Is this repairable or do i need a new pulley? Also does anyone know the size of the crank bolt. The largest socket i got is 36mm and thats a bit to small.

[the laird]

The part that has separated is a damper built into the pulley I reckon you will need a pulley,don't know what the bolt is

[Andy W]

The part that has separated is a damper built into the pulley I reckon you will need a pulley,don't know what the bolt is

Thanks for that. Priced a 2nd hand one up £50 +vat.

[rita]

Hi Andy W,

38mm socket for the crank bolt.

[Andy W]

Hi Andy W,

38mm socket for the crank bolt.

Nice one! Thanks

[M 80NGO]

You'll also need a locking tool to hold the pulley while u tighten the 38mm bolt Probs easier to bung a garage £20 to fit it for you.

[Northern Bongolow]

The part that has separated is a damper built into the pulley I reckon you will need a pulley,don't know what the bolt is

Thanks for that. Priced a 2nd hand one up £50 +vat.

try bongobits4u2012 or 200bhpcars, both these guys will help.

[Simon Jones]

Andy, I've dropped you a message regarding a spare pulley. If you'd like it, please let me know ASAP as I'll have to source 38mm socket to get it off

Cheers

[Andy W]

Andy, I've dropped you a message regarding a spare pulley. If you'd like it, please let me know ASAP as I'll have to source 38mm socket to get it off

Cheers

PM sent.

[Simon Jones]

Cheers Andy - will get that sorted for you

[Simon Jones]

A quick q: is it left hand or right hand thread? I'm guessing its standard: lefty loosy righty tighty

[Andy W]

A quick q: is it left hand or right hand thread? I'm guessing its standard: lefty loosy righty tighty

Don't know as i haven't tried to take it off yet