Vacuum Hoses Post EGR Blanking

[Titan1995]

Fitted blanking plates to both EGR valves today and modified/ blanked of the various vacuum hoses as well.

I was advised that I have to keep the front two electronic units working to actuate the cold start device.

My question is this there are two vacuum units on the fuel pump, which goes to which electronic unit?

I am assuming that the rear vac unit goes to the rear electronic control and foremost one to the front controller. "Sort of blue wire red wire moment".

I would be grateful if someone can help me on this.

[jaylee]

You mean hoses 93-5104..? http://lushprojects.com/bongopartsmk2/c ... 1of02.html

Going to 24-8002..? http://lushprojects.com/bongopartsmk2/c ... mgno=.html

[Titan1995]

Yes I do mean those hoses. All seems to working correctly so must have got the 50/50 deal right.

[jaylee]

Good news!