V6 HT lead fitting / firing order

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
User avatar
mantaJim
Bongolier
Posts: 125
Joined: Fri Oct 07, 2011 9:09 pm
Location: Chorley

V6 HT lead fitting / firing order

Post by mantaJim » Tue Sep 25, 2012 12:33 pm

Does anyone have a decent image or instructions on dizzy/HT lead/cylinder fitting and firing order ?

I want to rule out the possibility that the RAC man may have put mine back incorrectly. I've seen the lushprojects exploded view but the way the ignition leads are shown is a little ambiguous. Any help much appreciated.

Cheers

Jim
V6 Mushroom
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: V6 HT lead fitting / firing order

Post by Simon Jones » Tue Sep 25, 2012 1:16 pm

If you're till stuck this evening, I've got the service manual at home & can look it up later on.
User avatar
mikeWalsall
Supreme Being
Posts: 3075
Joined: Thu Sep 01, 2011 7:11 pm
Location: Walsall West Midlands

Re: V6 HT lead fitting / firing order

Post by mikeWalsall » Tue Sep 25, 2012 1:20 pm

Should be like this ..

https://www.google.co.uk/search?q=Mazda ... 67&bih=319

Firing order -- 1-2-3-4-5-6

Remember you are looking from the rear of the vehicle to differ left and right ..

ie; looking from the rear of the engine 1-3-5 are on the right bank .. 2-4-6 are on the left bank ..
JAL Mushroom roof,12/240v, fridge, cooker, sink, LPG V6 .. (written off @ £5500 Nov 2016)
User avatar
mantaJim
Bongolier
Posts: 125
Joined: Fri Oct 07, 2011 9:09 pm
Location: Chorley

Re: V6 HT lead fitting / firing order

Post by mantaJim » Tue Sep 25, 2012 10:40 pm

Thanks guys - managed to sort it out - alas not sorted my starting prob
V6 Mushroom
Locked

Return to “Techie Stuff”