new head causing knocking (HELP)

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

adamhardwidge

Re: new head causing knocking (HELP)

Post by adamhardwidge » Fri Aug 17, 2012 2:43 pm

Changed fuel filter. poured bottle of redex in certenly better but still there under load quite loud is it worth moving fuel pump
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: new head causing knocking (HELP)

Post by mikeonb4c » Fri Aug 17, 2012 3:14 pm

adamhardwidge wrote:Changed fuel filter. poured bottle of redex in certenly better but still there under load quite loud is it worth moving fuel pump
Might it be worthwhile nursing it over to Bell Hill Garage to see if they can get it sorted. Not too far off for you, and they know Bongos:

http://www.bellhillgarage.com/locationmaps.htm

Interesting it is worse under load. Makes me think it is not so much a mechanical problem, as a tuning one. I'm not techie but I'd have thought you could try moving the pump PROVIDED you scribe the current position and can restore it to its original setting. I think I was told it only takes a minute movement to put the tuning out. :?
rita
Supreme Being
Posts: 3286
Joined: Tue Sep 15, 2009 7:11 pm

Re: new head causing knocking (HELP)

Post by rita » Fri Aug 17, 2012 4:10 pm

adamhardwidge wrote:Changed fuel filter. poured bottle of redex in certenly better but still there under load quite loud is it worth moving fuel pump
Hi Adam,you stated that "if you move the fuel pump, it will stop for 2 mins then comes straight back weird."It does sound timing/fuel related.

Cheers.
User avatar
Northern Bongolow
Supreme Being
Posts: 7722
Joined: Mon Mar 15, 2010 11:33 pm
Location: AKA Vanessa

Re: new head causing knocking (HELP)

Post by Northern Bongolow » Fri Aug 17, 2012 5:50 pm

does the noise sound like something hitting the piston ??. glow plug tip or valve ??. maybe as brywy said go fishing with a magnet on a probe.
User avatar
mikeonb4c
Supreme Being
Posts: 22877
Joined: Sun Nov 05, 2006 10:49 pm
Location: Living with Mango Bongo in the North West but with a tendency to roam
Contact:

Re: new head causing knocking (HELP)

Post by mikeonb4c » Fri Aug 17, 2012 6:01 pm

Northern Bongolow wrote:does the noise sound like something hitting the piston ??. glow plug tip or valve ??. maybe as brywy said go fishing with a magnet on a probe.
But make bl**dy sure the magnet doesn't come off the probe when its in the hole 8-[ #-o 8)

I'd eliminate the tuning suspects first - you'd think it would make a noise under any running conditions if the mechanic had dropped his small change in a pot before putting the lid back on (not strictly true but....). 8)
adamhardwidge

Re: new head causing knocking (HELP)

Post by adamhardwidge » Fri Aug 17, 2012 10:11 pm

well possibly tried everything now and run out of ideas any suggestions would be great

Thankyou
Post Reply

Return to “Techie Stuff”