V6 sump plug size
Moderators: Doone, westonwarrior
-
Simon Jones
- Supreme Being
- Posts: 9341
- Joined: Mon Aug 29, 2005 3:34 pm
- Location: Salisbury (ish), Wiltshire
V6 sump plug size
Thinking of fitting a magnetic sump plug to my V6 to pick up any bits floating around. Can anyone confirm the thread size is M14 x 1.5. It seems to be a common size for many Mazdas: http://www.ebay.co.uk/itm/Ms-MAGNETIC-O ... 3949wt_986
-
The Great Pretender
- Supreme Being
- Posts: 2671
- Joined: Thu Oct 19, 2006 10:10 pm
- Location: Wigan
Re: V6 sump plug size
Probably..............but............... 
..............If you dismember an old hard drive you will find some really strong magnets that you can simply attach to the sump to hold anything that can be magnetised. I put one on the base plate of my 1956 BSA.............Bloody hard to kick over now if the crank is at bottom dead centre..............
..............If you dismember an old hard drive you will find some really strong magnets that you can simply attach to the sump to hold anything that can be magnetised. I put one on the base plate of my 1956 BSA.............Bloody hard to kick over now if the crank is at bottom dead centre.............. To infinity and beyond
-
The Great Pretender
- Supreme Being
- Posts: 2671
- Joined: Thu Oct 19, 2006 10:10 pm
- Location: Wigan
