HAND BRAKE COVER

bobandsuzzi · Post by **bobandsuzzi** » Sat Dec 03, 2011 10:15 am

I am a new member, looking to get a leather hand brake cover, someone on another forum told me this is a good place to look

mikeWalsall · Post by **mikeWalsall** » Sat Dec 03, 2011 11:16 am

I think the member you are after is ... daveblueozzie

New Forest Terrier · Post by **New Forest Terrier** » Sat Dec 03, 2011 2:37 pm

http://myworld.ebay.co.uk/wwwbongomaniacouk

Got a set of black leather handbrake and gearlever cover from this site. Both look good and have worn well. None listed at the moment, but if contacted they will probably list them.

daveblueozzie · Post by **daveblueozzie** » Sat Dec 03, 2011 4:43 pm

mikeWalsall wrote:I think the member you are after is ... daveblueozzie

Sorry dont have anymore covers left.

mikeWalsall · Post by **mikeWalsall** » Sat Dec 03, 2011 5:43 pm

I've still got all my hand tools from 50 years in the Saddlery trade .. but I have got rid of my 45K walking foot Singer sewing machines .. and I would not fancy hand stitching now ..

There again .. I am more used to using 4-6mm Veg tanned bridle butts than thin .. chrome tanned Hide ..!!

Bogmonster40 · Post by **Bogmonster40** » Sat Dec 03, 2011 11:20 pm

I used these people who i bought a centre console arm rest cover and a few other bits and bobs. The stuff they sent did not fit my model but they took them back no problem whatsoever and asked me for the correct measurements with pictures and they would make me what I wanted.

http://www.ebay.co.uk/sch/topgaiters/m. ... ksid=p3686

Just drop them a line I am sure they will help you.

helen&tony · Post by **helen&tony** » Sat Dec 17, 2011 12:09 pm

hi Mike
I'll have to natter with you some time...many years back, hand-carving leather and stitching the proper way was my hobby...quality stuff...reproduction leather, motorbike saddlebags, cases...only for friends and people who knew how long it takes to stitch nearly 1/2 " of leather

...I had been thinking of a rear-mounted spare for the Bongo, and a hand-carved and dyed wheel cover a la old school western pattern, but I'm not sure my hands would work

...ain't arthritis wonderful

(still got all the tools!)
Cheers
Helen

mikeWalsall · Post by **mikeWalsall** » Sat Dec 17, 2011 1:46 pm

After 50 years of cutting 4mm Bridle and 5-6mm Stirrup butts all by hand, with a plough gauge, my right hand / shoulder are feeling there age ..!!

the janner vanner · Post by **the janner vanner** » Sat Dec 17, 2011 4:42 pm

Hi folks,
the guy that recovered my seats centre consle works out of Wixenford farm in Plympton, Devon.
paul@southwestcontractfurniture.co.uk

Bogmonster40 · Post by **Bogmonster40** » Sat Dec 17, 2011 11:17 pm

what a stunning job they have done of your seats !!

wishmaster · Post by **wishmaster** » Wed Dec 28, 2011 7:53 pm

bobandsuzzi wrote:I am a new member, looking to get a leather hand brake cover, someone on another forum told me this is a good place to look

Hi you have a PM

Regards Izzy

Poohbear · Post by **Poohbear** » Thu Dec 29, 2011 11:41 pm

New Forest Terrier wrote:http://myworld.ebay.co.uk/wwwbongomaniacouk

Got a set of black leather handbrake and gearlever cover from this site. Both look good and have worn well. None listed at the moment, but if contacted they will probably list them.

Just go to their own website instead of their Ebay page and everything's listed: -

Click Here

Bogmonster40 · Post by **Bogmonster40** » Tue Jan 03, 2012 10:55 pm

Thanks Izzy my new gearstick cover is just the job - but you was not luring me into buying any "Flashlube" off you - I really am not that type of guy

HAND BRAKE COVER

HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER

Re: HAND BRAKE COVER