Reversing Lights failure.

[Eat Aunt]

Hi all,

Could anyone help with working out why my reversing lights have stopped working ?

Not bulb failure or fuse.

Expecting it to be the reversing light switch but don't know where it is located.

Any help is appreciated

Cheers

Ian

[bigdaddycain]

Are you still getting "reversing beeps" when "R" is selected?

[Eat Aunt]

Are you still getting "reversing beeps" when "R" is selected?

hello BDC

Yes I am

Tks

[g8dhe]

In that case the switch is probably working unless the voltage is being dropped across it such that the lamps don't come on but it does trigger the warning buzzer;

There are several connectors, but if both lamps are out that seems unlikely, they also use separate earths so again not a common point either.
I would try a voltmeter to check the voltage after the switch, also make sure all your other rear lights are working as well as the reverse!

[Eat Aunt]

Many thanks

Thank you for the replly's ...We have recently changed a load of the hoses for the cooling system, and I wondered if we may have accidentally knocked apart a connector maybe?

Glad it's not the switch

Both reversing lamps are not working

All other rear lamps are ok

Will have another look later

Cheers

Ian

[rita]

Hi Eat Aunt,

Did you physically check the bulbs and the feed,it is not unusual for two bulbs to go Kaput at the same time.

Cheers