Wiper linkage ball cap

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
mbockh

Wiper linkage ball cap

Post by mbockh » Thu Oct 06, 2011 9:20 pm

Hi
I need a replacement white nylon ball cap on the wiper linkage. Any ideas of where I can obtain one.

many thanks Mike
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: Wiper linkage ball cap

Post by teenmal » Thu Oct 06, 2011 9:35 pm

mbockh wrote:Hi
I need a replacement white nylon ball cap on the wiper linkage. Any ideas of where I can obtain one.

many thanks Mike

Hi mike,I dont think Mazda supply this part seperate,you would need to purchase the link arm itself.

You may be able to obtain the joint from a good motor factor, or a visit to a car breakers,should be quite a common part.

Cheers..
321Away
Tribal Elder
Posts: 783
Joined: Mon Oct 26, 2009 1:45 pm
Location: Berkshire
Contact:

Re: Wiper linkage ball cap

Post by 321Away » Fri Oct 07, 2011 1:08 pm

only ever found it as a whole mazda part

http://lushprojects.com/bongopartsmk2/c ... mgno=.html

Julian
teenmal
Supreme Being
Posts: 3656
Joined: Thu Mar 27, 2008 6:08 pm
Location: north lanarkshire

Re: Wiper linkage ball cap

Post by teenmal » Sun Oct 09, 2011 5:31 pm

Hi,if you are stuck this might be an option.

http://www.askthemechanic.co.uk/wipers/

Cheers
M 80NGO
Supreme Being
Posts: 1913
Joined: Wed Sep 01, 2010 9:24 pm
Location: Usually in My own wibbly wobbly lill world ! Otherwise Huntingdon.

Re: Wiper linkage ball cap

Post by M 80NGO » Sun Oct 09, 2011 8:05 pm

When i was roadsiding for tha AA we used to stretch the finger of a latex glove over the ball and push it back into the socket as a temp repair

Also using Rain X on your screen will prolong the life of your wiper system cos you won't need to use it half as much :wink:
Post Reply

Return to “Techie Stuff”