atf transmission pipe & clips supplier?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
Glenn_G
Junior Bongonaut
Posts: 18
Joined: Wed Dec 10, 2008 10:24 am
Location: Milton Keynes

atf transmission pipe & clips supplier?

Post by Glenn_G » Sat Apr 23, 2011 2:54 pm

Hi all enjoying the sun I hope,

I need an atf transmission oil pipe and two clips that connect to the bottom of the radiator, it appears they are part numbers 19-934*1 & 99287-1600P*2 respectively as per following link :
http://www.lushprojects.com/bongopartsm ... o=.html#29

any ideas on who can supply these as searching this forum or google's not helping me so far?

cheers
Glenn
rita
Supreme Being
Posts: 3286
Joined: Tue Sep 15, 2009 7:11 pm

Re: atf transmission pipe & clips supplier?

Post by rita » Sat Apr 23, 2011 3:23 pm

Glenn_G wrote:Hi all enjoying the sun I hope,

I need an atf transmission oil pipe and two clips that connect to the bottom of the radiator, it appears they are part numbers 19-934*1 & 99287-1600P*2 respectively as per following link :
http://www.lushprojects.com/bongopartsm ... o=.html#29

any ideas on who can supply these as searching this forum or google's not helping me so far?

cheers
Glenn
Hi Glenn,

Try and PM Alacrity,he is a auto trans specialist.

Cheers..
Glenn_G
Junior Bongonaut
Posts: 18
Joined: Wed Dec 10, 2008 10:24 am
Location: Milton Keynes

Re: atf transmission pipe & clips supplier?

Post by Glenn_G » Sat Apr 23, 2011 9:51 pm

Thanks Rita,

I've pm'd Alcarity to see what he thinks.

Ta
User avatar
lazyb5
Tribal Elder
Posts: 505
Joined: Fri Sep 17, 2010 9:15 pm
Location: Peterborough

Re: atf transmission pipe & clips supplier?

Post by lazyb5 » Sat Apr 23, 2011 10:15 pm

You may be able to get away with small bore straight pipe think i was checking these today on my Bongo.
Image
Glenn_G
Junior Bongonaut
Posts: 18
Joined: Wed Dec 10, 2008 10:24 am
Location: Milton Keynes

Re: atf transmission pipe & clips supplier?

Post by Glenn_G » Mon Apr 25, 2011 12:36 pm

Thanks all for suggestions, I did think of getting any length of oil resistant pipe (& a couple of jubilee clips) but I was concerned that the pipe may not be precurved and therefore kink and stop oil flow ... and also the clips would not expland/contract with heat as well as these spring loaded clips.

Alcarity has been in touch and suggested I try Sussex Auto Parts 01323 848886, so I'll give them a call tomorrow.

cheers
Locked

Return to “Techie Stuff”