Technical questions and answers about the Mazda Bongo
Moderators: Doone, westonwarrior
-
charlieD
- Bongonaut
- Posts: 61
- Joined: Fri Feb 04, 2011 12:24 pm
- Location: Aberdeen
Post
by charlieD » Sun Apr 03, 2011 8:34 pm
Hi all,
Does anyone know where I can get my hands on a handbreak micro swich so my bongo knows the handbreak is on so I can raise the roof.
Ta

"I tried jogging once but the ice kept falling out of my glass" Dave Lee Roth
-
bigdaddycain
- Supreme Being
- Posts: 10637
- Joined: Fri May 13, 2005 11:58 am
- Location: Ince Lancs
Post
by bigdaddycain » Mon Apr 04, 2011 12:45 pm
Have you tried the usual bongo breakers Charlie? Bell hill etc?

ビッグダディケイン RIP Big Bank Hank (Imp the Dimp) 1957-2014
-
spud350
- Bongolier
- Posts: 279
- Joined: Sat Feb 13, 2010 3:40 pm
- Location: North West
Post
by spud350 » Mon Apr 04, 2011 2:35 pm
Why not just link it out. Can't see you deciding to raise the roof while travelling along.
-
charlieD
- Bongonaut
- Posts: 61
- Joined: Fri Feb 04, 2011 12:24 pm
- Location: Aberdeen
Post
by charlieD » Mon Apr 04, 2011 5:22 pm
Nice Avatar by the way
thought of that but a bit technically challenged LOL, will give it a go if I can't find a replacement
"I tried jogging once but the ice kept falling out of my glass" Dave Lee Roth
-
jaylee
- Supreme Being
- Posts: 5500
- Joined: Wed Mar 05, 2008 4:56 pm
- Location: AQVAE SVLIS
Post
by jaylee » Mon Apr 04, 2011 7:00 pm
Charlie, does yer brake warning light come on the dash when the hand brake is applied..? (ignition on.)

Cheaper by comparison to a race horse...

-
waycar8
- Supreme Being
- Posts: 3037
- Joined: Fri Mar 17, 2006 9:35 pm
- Location: west yorkshire
Post
by waycar8 » Mon Apr 04, 2011 7:14 pm
Take the grey plastic center console off and see if there owt wedged in between the spring and the metal bit or if the green wire is broken off near the copper washer.
Also follow the green wire to see if the yellow wire is connected to it, the connector block may have worked loose or the contacts may need cleaning
-
charlieD
- Bongonaut
- Posts: 61
- Joined: Fri Feb 04, 2011 12:24 pm
- Location: Aberdeen
Post
by charlieD » Wed Apr 06, 2011 12:23 pm
thanks for all the advice guys, I'll have a look at this tonight and get back to you
Cheers
"I tried jogging once but the ice kept falling out of my glass" Dave Lee Roth
-
AlliDelta
Post
by AlliDelta » Wed Apr 06, 2011 12:47 pm
Mine was a bit intermittant just gave it a good roughing up with my leatherman file and all is sorted!
-
charlieD
- Bongonaut
- Posts: 61
- Joined: Fri Feb 04, 2011 12:24 pm
- Location: Aberdeen
Post
by charlieD » Sun Apr 17, 2011 5:53 pm
AlliDelta wrote:Mine was a bit intermittant just gave it a good roughing up with my leatherman file and all is sorted!
Aye, mine too. Went out the other night and up the roof went no problem, think I'll try the file option
"I tried jogging once but the ice kept falling out of my glass" Dave Lee Roth
-
AlliDelta
Post
by AlliDelta » Sun Apr 17, 2011 9:21 pm
It's not even a microswitch. It's just a bit of metal and a spring. Simple but it works. Most of the time.