Fitting Wiper Blades
Moderators: Doone, westonwarrior
Fitting Wiper Blades
Received via email. Anyone want to write a few sentences about the procedure? I've never had to change mine.....
"Are there any easy, idiot-proof instructions for changing wipers that you can send me?"
"Are there any easy, idiot-proof instructions for changing wipers that you can send me?"
668. The Neighbour of The Beast.
Re: Fitting Wiper Blades
I have fitted the new aero designed ones on mine they just push onto the hooked ends of the arms and then you close the supplied catch to stop them coming off
prior owner of >>>>1999 2.5 diesel ex tin top &FORD FREDA 2000 2.0 LTR PETROL
Re: Fitting Wiper Blades
I used the ' remote hands ' fit system on mine. Guy at the garage did it. I was remote.
Simples...
(or whatever those bally monkey rat rabity things say)


-
- Bongolier
- Posts: 109
- Joined: Mon Nov 09, 2009 11:39 pm
- Location: derby
Re: Fitting Wiper Blades
I added these to mine
scrol down the link below for the instructions worked for me. And "I'm a complete idiot when it comes to cars" quote from my mate who's a master tec for a main dealer.
http://cgi.ebay.co.uk/Mazda-Bongo-RETRO ... 5884ed85c8
David.
scrol down the link below for the instructions worked for me. And "I'm a complete idiot when it comes to cars" quote from my mate who's a master tec for a main dealer.
http://cgi.ebay.co.uk/Mazda-Bongo-RETRO ... 5884ed85c8
David.
Re: Fitting Wiper Blades
they are the same as ive got
prior owner of >>>>1999 2.5 diesel ex tin top &FORD FREDA 2000 2.0 LTR PETROL
- mikexgough
- Supreme Being
- Posts: 6158
- Joined: Mon Sep 08, 2008 9:02 pm
- Location: Cambridgeshire - where the all the Slodgers reside
- Contact:
Re: Fitting Wiper Blades
I have the Aero types from Tesco........ lift the flap......slide the fitting into the "hook" at the end of the wiper arm......close the flap...... job done.... That's what I call easy.....
Conversant with Bongo Top Pinion Oil Seals
Bongo owning Velotech Cycle Mechanic
Bongo owning Velotech Cycle Mechanic
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: Fitting Wiper Blades
Don't forget to remove the old ones first though, or if could get a bit crowdedmikexgough wrote:I have the Aero types from Tesco........ lift the flap......slide the fitting into the "hook" at the end of the wiper arm......close the flap...... job done.... That's what I call easy.....


You can't polish a turd - but you can roll it in glitter.
-
- Supreme Being
- Posts: 1193
- Joined: Sun Feb 05, 2006 9:25 am
- Location: the forgotten corner of Cornwall
Re: Fitting Wiper Blades
Kirsty, your Signature echo's my sentiments exactly. Nice one. Wish i'd have thought of it, you know me, it would be up on the side of my AFT in a flash.

The Janner Vanner
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: Fitting Wiper Blades
I didn't think of it, tripped over it somewhere a few weeks back, feel free to pinch itthe janner vanner wrote:Kirsty, your Signature echo's my sentiments exactly. Nice one. Wish i'd have thought of it, you know me, it would be up on the side of my AFT in a flash.

You can't polish a turd - but you can roll it in glitter.
Re: Fitting Wiper Blades
See here for the other 44 quotes ! I think most actually apply 

Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.