central locking wires

[davelou]

Hi all,
I've asked this question before recently and didn't get an answer Can somebody please tell me what the 3 wires in the central locking are for They are black. blue . Green & white. I want to wire up a remote central locking kit and don't own a multimeter.I have found out not to waste money on a flip out key as they don't do one for the bongo,even if the one supplied look the same and have the same reference no. as the original Many thanks Dave

[dobby]

Dave

I'm sure there's a set of instructions in the members area for this?

I did mine about 4 years ago and long since forgotten.

PS How's the motor running?

[missfixit70]

Yup, there's a factsheet in the members area that shows the wiring.
You can get a cheap meter for a few quid, well worth the investment for faultfinding as well.
Re the flip out key did you get the same as these guys? - http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=34158

[davelou]

Hi Graham,
The fact sheet doesn't list the wires used or if it does I cant read the writing on my print out The head issue was sorted after 3 heads The block was skimmed by the head suppliers and cured the issue The final bill was reasonable and mr Taylor once again proved what a decent bloke he is to do buisness with Dave

[dobby]

I'm colour blind and I couldn't read them either

Glad it all got sorted, he's a good lad that Mr Taylor

I keep on thinking of ringing him to tell ours is going ok but I don't want to tempt fate...


Thinking of running a mini meet at RAF Cosford - tempted? I've asked them for available dates etc. Should be a bit better for facilities than Tackeroo in the winter

[davelou]

I would be interested to go to a mini meet and show off my conversion now the beds in What a difference it has made to bongo life Dave

[dobby]

Great, I will sort a date as soon as I hear from the museum.

I just had a look at the copy of the factsheet I download in July 2005

It's as per missfixit70 advice - you'll need a multi meter or a bulb holder and two wires, or pop up the A34 and use mine

[davelou]

Thanks for the offer.i may as well buy a meter for future use.Dave

[dobby]

Maplins should be ok

[jaylee]

davelou.. What make is the RCL unit?

[davelou]

hi jaylee, its one bought from rightklick web site.Dave

[321Away]

unless you have factory fitted RCL then you dont have a motor in the drives door, so you accessing the vehicles wiring will only end in tears, configure your unit as direct motor control and add a motor to the drivers door, takes 30 mins.

Julian

[davelou]

Hi Julian,
Can you explain in simple terms please I can't get the indicators to flash as yet So adding a motor might be too much work for me Dave

[missfixit70]

By motor he means actuator as described in the fact sheet. Easy enough to do, hardest bit is finding the right position to mount it & that isn't particularly difficult, it can just be a bit of a bloody knuckle job.

[dobby]

There's a top tip of cutting the clear plastic film and taping afterwards rather than disturbing the black sticky sealant (from hell).....too late?