HELLO new friends. We have recently bought a Bongo - LOVELY. However, we broke the aerial!! We've bought a new one from "fury.co.uk" but we can't get the old one off!!?!?
Can anyone help?
Thanks everso, Bob and Chrissie
Bongo aerial replacement
Moderators: Doone, westonwarrior
Re: Bongo aerial replacement
There is a FACTSHEET on the club site see the top centre of the screen that gives all the details.
Geoff
2001 Aero V6, AFT, full side conversion.
2001 Aero V6, AFT, full side conversion.
- widdowson2008
- Supreme Being
- Posts: 1703
- Joined: Tue Nov 18, 2008 10:15 pm
- Location: N.E.Derbyshire
Re: Bongo aerial replacement
BobandChrissie wrote:HELLO new friends. We have recently bought a Bongo - LOVELY. However, we broke the aerial!! We've bought a new one from "fury.co.uk" but we can't get the old one off!!?!?
Can anyone help?
Thanks everso, Bob and Chrissie
try this
http://www.igmaynard.co.uk/bongo/member ... aerial.pdf
Steve
- westonwarrior
- Supreme Being
- Posts: 2918
- Joined: Thu Apr 05, 2007 6:27 pm
Re: Bongo aerial replacement
Give us a location and some one local may even be able to help.
reply tp Best Rob
Hello Best Rob
we're in Okehampton, Devon, 23 ish miles W of Exeter
thanks
Bob and Chrissie
we're in Okehampton, Devon, 23 ish miles W of Exeter
thanks
Bob and Chrissie
- westonwarrior
- Supreme Being
- Posts: 2918
- Joined: Thu Apr 05, 2007 6:27 pm
Re: Bongo aerial replacement
you need to flick the black and chrome cap out of the center, there is an allen bolt underneath do not undo the 2 screws
be carefull of not loosing the bearing that makes it click
as mentioned there is a full fact sheet on this and dozens of other fact sheets on as many topics in the members area
be carefull of not loosing the bearing that makes it click
as mentioned there is a full fact sheet on this and dozens of other fact sheets on as many topics in the members area
Re: Bongo aerial replacement
Thanks Robwestonwarrior wrote:you need to flick the black and chrome cap out of the center, there is an allen bolt underneath do not undo the 2 screws
be carefull of not loosing the bearing that makes it click
as mentioned there is a full fact sheet on this and dozens of other fact sheets on as many topics in the members area
we'll let you know how we get on
B and C