Head is off,now I need to remove studs and pipe to send away

[draper3000]

Good afternoon.
I've just received my brnad new Bongo Cylinder Head, its a part exchange deal and I need to send back the old one.

Almost everything taken off thats needed apart from two bits. Advice needed on how to remove:

- Some studs (where the manifolds were bolted on, some did not come off with nuts?...)

- Pipe coming off side of head head (think its a water pipe, which slits into 3, cant see how to remove it?)...got a new one one with the new head but that one only splits into 2 pipes.?

Any help very very appreciated.

Cheers

Jon

(Been trying to get the van fixed for the last 2 months..still though getting a smaller beer belly due to cycling to work every day).

Also now know alot more about engines....Bongo diesel engines specifically.

[francophile1947]

If the new head only has two pipes, instead of 3, it's not a Bongo head but a Ford Ranger one. The 3rd pipe is for the bleed pipe.
Sorry, no idea about getting the studs out, apart from putting 2 nuts on (one acting as a locknut) to unscrew them.

[draper3000]

Hi...thanks for the reply.

The compan assure me the head is correct for my Bongo.

The 2 ended pipe was not already attached to the head, but separate in a bag..

Will check it over thoroughly tomorrow...making sure the head is correct.

Any ideas on how the pipe comes off?

[francophile1947]

Any ideas on how the pipe comes off?

No idea - somebody should know though

[draper3000]

any body know????