Tyre sizes for my new Alloys

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Locked
Germarchip

Tyre sizes for my new Alloys

Post by Germarchip » Fri Jul 03, 2009 1:51 pm

Hi all
Please excuse my ignorance on this subject (as with many subjects) #-o
I have just bought a set of 17" alloys for my beloved (Bongo of course). Can anyone advise me on the best or correct tyre size to fit? I understand that the loading should be around 96, but really need some expert knowledge on the correct sizing [-o<
User avatar
madmile
Supreme Being
Posts: 1506
Joined: Thu May 12, 2005 10:45 pm
Location: south wales

Re: Tyre sizes for my new Alloys

Post by madmile » Fri Jul 03, 2009 2:00 pm

Many of us are running 215/55/17 and if you go for 'accellera' they are reasonably priced and 98 loading. They are a little taller, but not by much and are unlikely to affect your speedo etc.
francophile1947
Supreme Being
Posts: 11354
Joined: Mon Dec 18, 2006 6:15 pm
Location: Norwich

Re: Tyre sizes for my new Alloys

Post by francophile1947 » Fri Jul 03, 2009 2:16 pm

A lot of us also use 225/55x17 :D
John
(Evidence that intelligent life exists in the universe, is that it hasn't tried to contact us)
User avatar
Scott
Supreme Being
Posts: 1024
Joined: Thu Jun 11, 2009 7:39 pm
Location: Northamptonshire

Re: Tyre sizes for my new Alloys

Post by Scott » Fri Jul 03, 2009 2:38 pm

Hi, I have been looking into this all week and a lot of head scratching (I'm new to this Bongo lark) this is what I have been lead to believe:

Alloys:

PCD: 5x114.3 / ET: 40-45 / BORE 67.1 (The same as a Mazda RX8 I think?)

Tyres:

225/50 R17 98W XL (size to keep same diameter as originals and 98W XL to be 'insurance' safe)

But as I said I am new to this and might have got the wrong end of the stick :)
The user formerly known as csmcqueen ;)

スコット
Germarchip

Re: Tyre sizes for my new Alloys

Post by Germarchip » Fri Jul 03, 2009 2:46 pm

Thanks for your help. I will start shopping!!! =D> =D>
Locked

Return to “Techie Stuff”