Hi all
Newbie from Sheffield here, having just bought a 96 black over grey 2.5d auto tin top.
I may be being extraordinarily thick but i cannot get into the bonnet area. I have pulled the catch in the cockpit and the bonnet pops out but i cannot find any catches or buttons underneath the bonnet to lift it fully.....tell me i'm not going mad! Any help would be greatly appreciated.
Thanks
Matt
Bonnet opening
Moderators: Doone, westonwarrior
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: Bonnet opening
you are going mad
in the middle of the bonnet is the catch, it's a bit of an awkward one to get you fingers round, but it should be there, it's a pull it up job if I remember right.
Welcome to the forum BTW

Welcome to the forum BTW

You can't polish a turd - but you can roll it in glitter.
-
- Supreme Being
- Posts: 1442
- Joined: Mon Aug 18, 2008 10:50 pm
- Location: New Forest
Re: Bonnet opening
Catch is just to the right of the badge and down behind the grille. You need to do it by feel.
Next post How do I find the engine?
Its quite jaw dropping to find there isnt one in sight. 
Next post How do I find the engine?


The BewilderBeast - V6 Mean Green Tintop with LPG and 321 Away Montague Conversion