removing switch blanks

[peanutcrusher]

can someone help with this one i'm trying to remove the blanks and coin holder from the dash so as to be to put my spot light switch in. i've been told the wiring will already be there just need to put the switch in. which side of the steering is it more than likely to be?

[waycar8]

most Ihave seen the foggy is on the right of the steering wheel

not all bongo has the wiring loom, easy way to tell is look under you bumper and see if the wires are there for the actual fog lights.

[haydn callow]

Just lever them out with a small flat screwdriver,,,,you will soon see if there is a loom at the back....on the right is the place to aim for.

[Gert The Green]

You started blinging that van up wiv all those maga cheap parts av ya
Good to have met ya mate,a mini Plymouth 'bash' lol.

Any bits you couldn't get ?

[peanutcrusher]

working on the pimping, the lower part of the front loom was not there when i looked i take that means that the top part will be missing as well i'll have to sort out the top half of the loom.

[waycar8]

working on the pimping, the lower part of the front loom was not there when i looked i take that means that the top part will be missing as well

Yep , you will have to re wire it all in.

[Bulwell Bongoleers]

Hi

I have a spare lower part of the loom the bit that connects to the fog lights

Andy