steve&susan wrote:thanks for advice thinking of fitting roofrack and homemade bracket to hold caravanstore
Very good idea
Post a picci when you have done it 
A nna
awning rollout
Moderators: Doone, westonwarrior
-
not so old
- Supreme Being
- Posts: 2655
- Joined: Tue Jun 17, 2008 12:02 pm
- Location: Oxfordshire
Re: awning rollout
Very good idea
Post a picci when you have done it A nna
Things always get better after they are worse
So it's good to make things worse as soon as possible!
So it's good to make things worse as soon as possible!
Re: awning rollout
I've got a caravan store on my AFT,and as Mike mentioned,mine is fixed on to the Bongo with an aluminium 'C' channel
which is screwed onto the bodywork,just under the AFT and it rests on the gutter......This way,it can stay on the Bongo
at all times without interfering with the roof or opening windows. It's been on the Bongo now for 2 years with no ill
effect You can use this method on the Tintop as well as the AFT. 
which is screwed onto the bodywork,just under the AFT and it rests on the gutter......This way,it can stay on the Bongo
at all times without interfering with the roof or opening windows. It's been on the Bongo now for 2 years with no ill
effect
You can use this method on the Tintop as well as the AFT. My Names Bond......Lee Bond!!
Re: awning rollout
Here are a few pics, just taken.not so old wrote:steve&susan wrote:thanks for advice thinking of fitting roofrack and homemade bracket to hold caravanstore
Very good idea
A nna
Using Crazy uncle gray and his great idea of alloy angle and awning rail, I hope that I am right in this, thanks uncle
There is more stupidity than hydrogen in the universe, and it has a longer shelf life.
F Zappa
F Zappa
-
mikeonb4c
- Supreme Being
- Posts: 22877
- Joined: Sun Nov 05, 2006 10:49 pm
- Location: Living with Mango Bongo in the North West but with a tendency to roam
- Contact:
Re: awning rollout
Crazys and lizards is great if you've got the skills or contacts to do it. I really like M 80NGDs idea and would love to see pics. I'm always scared about / reluctant to drill bodywork (so irreversibleM 80NGD wrote:I've got a caravan store on my AFT,and as Mike mentioned,mine is fixed on to the Bongo with an aluminium 'C' channel
which is screwed onto the bodywork,just under the AFT and it rests on the gutter......This way,it can stay on the Bongo
at all times without interfering with the roof or opening windows. It's been on the Bongo now for 2 years with no ill
effect
) but it sounds like it's a reasonable idea if done underneath the AFT (any sealant needed to ensure rain doesn't get in when roof raised)? On a tintop, the channel will be permanently exposed so you'd need not to mind that plus be extra sure there was no water ingress through the screw holes as it would be permanently exposed to weather. V. good idea though (and cheap as it gets) 
PS - just realised it wouldn't work for me though as my awning is way longer than the area under the AFT
